Location -> Products -> Water Treatment -> On-line Instrument -> Industry pH/ORP Meter
Type：CX-IPH-1207 industrial pH meter
Illustrate：It is widely use for on-line measurement and monitoring of water quality in industrial processes in pharmacy, electronics, chemical engineering and many other industries.
CX-IPH-1207 Industrial PH Meter
Brief Introduction
1.CX-IPH-1207 series of microcomputer-based industrial control instruments are precision meters for measurement of PH value of solution.
2.With simultaneous display of PH value and temperature, complete functions, stable performance, simple operation
3.It is characterized by single-chip technology, LCD display with back light, automatic temperature compensation, two-point calibration, high/low point control and current output, making it an optimal meter for medium and small-scale measurement and control of PH value.
4.Various PH electrodes can be used in CX-IPH-1207 series of instruments.
Main Features
1.US T1 chips; 96 x 96 world-class shell; world-famous brands for 90% parts
2.Isolated protection output by means of photo coupler; no interference between input and output signals
3.EEPROM memory; backup battery not required and no data loss after power-off;
4.High-performance operational amplifier; symmetrical ORP positive and negative values; low temperature drift;
5.High stability and accuracy
Main Parameters
| Measuring range | pH 0.00~14.00pH; resolution: 0.01 pH |
| Resolution | |
| Accuracy | ±0 1 pH; Stability: ≤0.05pH/24h |
| Control range | 0-14.00pH |
| Temperature compensation | 0-60°C |
| Temperature of medium | 5-50°C |
| Output control mode | On/Off relay output contacts, maximum load230V/5A |
| Output signal | 4-20mA isolated protection output; maximum load: 500Ω |
| Size of thread: | Upper and lower 3/4” pipe thread (electrode installation dimension) |
| Pressure of medium | 0-0 5Mpa |
| Display mode | 3 1/2 LCD |
| Power supply | AC 220V ±10%50Hz |
| Power consumption | 5W |
| Ambient conditions | 0-50°C; (2) Humidity ≤85%RH |
| Overall dimension | 96 ×96 ×115mm(height x width x depth) |
| Dimension of the hole | 92 ×92 mm (height x width) |
Last：CX-IPH-1205B industrial pH meter Next：CX-IPH-1205A industrial pH met..
