Location -> Products -> Water Treatment -> On-line Instrument -> Industry Conductivity Meter
Type：CX-ICM-1108 industrial conductivity meter
Illustrate：It’s widely used in electricity, chemical fertilizer, metallurgy, environmental protection, pharmacy, biochemistry, food and running water etc continue to measuring the data of salinity in liquid.
CX-ICM-1108 Industrial Conductivity Meter
Brief Introduction
CX-ICM-1108 type industrial conductivity meteris our company up to the minute English microcomputer type high grade instrument, with English menu operating , intelligent, multifunctional, measurement of high performance, environmental adaptability etc feature.
The characteristic of instrument: The new layout design, Aluminum housing, metal texture,to make the high grade E times Water mete!All english display interface is friendly, most parameters can display at the same time. Conductivity, output current, temperature, time and status all can display on one screen. We are take high resolution lattice graphics LCD module, all the display of data, status is English, without factory own definition of the symbols or codes.
Technology Parameters
| Salinity measuring range | 0~10mg/L; 0~100mg/L;0~1000mg/L;0~10000mg/L |
| Electronic unit basic mistake:conductivity | ±0.5%FS,temperature:±0.3C |
| Automatic temperature compensation range | 0~99.9C,25C basic temperature |
| The measured water sample(including water steam) | 0~99.9C,0.6MPa |
| The basic error of the instrument:salinity | ±1.0%FS,temperature:±0.5C |
| The electronic unit of automatic temperature compensation of error | ±0.5%FS |
| The electronic unit repeatability error | ±0.2%FS ±1 vocabulary |
| The electronic unit stability | ±0.2%FS ±1 vocabulary /24h |
| Current isolation output | 0~10mA(load <1.5kΩ),4~20 mA (load <750Ω) |
| Output current error | ≤±1%FS |
| Effect of environmental temperature of the electronic unit error | ≤±0.5%FS |
| The electronic unit power supply voltage error | ≤±0.3%FS |
| Alarm relay | AC220V.3A |
| Communication interface | RS485 or 232(optional) |
| Current source | AC220V±22V,50Hz±1Hz |
| Waterproof and dustproof design | grade of protection IP54,Cast aluminum housing suitable for outdoor use |
| Clock precision | ±1 min/month |
Last：沒有了 Next：CX-ICM-1105B industrial conduc..
