Location -> News
News
Zero point adjustment method of gas mass flowmeter and gas mass controller
sales01@cxflowmeter.com
For gas mass flow meter flow sensor and gas mass flow controller, the zero point adjustment is located above the air inlet,
the word ZERO is on the side of the controller (flow meter), and the regulator below the opening can be seen.
Please use a small "slotted" screwdriver to adjust. For the adjustment range, please refer to the value of the
zero-point transmission signal. Usually we recommend that the zero point be adjusted between -0.01~-0.03.
For gas mass flow meter flow sensor and gas mass flow controller, the zero point adjustment is located above the air inlet,
the word ZERO is on the side of the controller (flow meter), and the regulator below the opening can be seen.
Please use a small "slotted" screwdriver to adjust. For the adjustment range, please refer to the value of the
zero-point transmission signal. Usually we recommend that the zero point be adjusted between -0.01~-0.03.
If you want to know more specific parameters and quotations of different models of gas mass flow meters
and gas mass control,please consult winny:sales01@cxflowmeter.com
and gas mass control,please consult winny:sales01@cxflowmeter.com
Last：Controls gas flow meters and va.. Next：The role of gas quality control..
